Maintenance Schedule

Regular maintenance is necessary if the engine and transmission are to operate without problems. It is important that maintenance work is not forgotten and is done properly. Below is a maintenance schedule that deals with the recommended maintenance work. Read the chapter Maintenance carefully before starting work. If there is any item you are not sure of, please

contact your Volvo Penta dealer for more information.

IMPORTANT! These service operations must be carried out by an authorized Volvo Penta Service workshop.

Daily before starting first time:

● Engine. Check oil level ● Fuel system. Check for leakage ● Exhaust/Cooling system hoses/clamps. Check for leakage

Every two weeks:

● Battery. Check electrolyte level ● Drive belts. Check belt tension ● Servo pump. Check oil level ● Drive. Check corrosion protection

Checks every 50 hours or at least once a year:

● Steering shaft bearing. Lubricate ● Flame trap mounting. Tighten

Every 100 operating hours or at least once a year:

● Engine oil and oil filter. Replace ● Fuel filter. Replace ● Trim pump. Check oil level ● Drive (SX, DP-S). Oil replace ● Drive (SX-C only). Aluminum anode in exhaust passage. Replace . ● Drive (SX, DP-S). U-joint and exhaust bellows.

Check

Drive (SX, DP-S). U-joint and primary shaft bearing. Lubricate

Every 200 operating hours or at least once a year:

● Spark plugs. Replace ● Ignition cables and distributor cap.

Check and clean ● Drive belts. Check ● Carburetor filter. Check ● Flame trap. Clean ● Seawater pump. Check ● Controls. Check, adjust ● Anti-fouling paint. Check

Every other year:

● Seawater pump. Replace impeller

Drive. Replace U-joint and exhaust bellows