Propeller replacement, DP-S drive

D

C B

A

Removal

WARNING! Ignition switch must be OFF. ● Place remote control in the FORWARD position to lock propeller shafts. ● Remove rear propeller nut (A). ● Remove the rear propeller (B). ● Place remote control in the REVERSE position to lock propeller shafts. ● Remove the front propeller nut (C). ● Remove front propeller (D). ● Wipe propeller shafts clean. Inspect for monofilament line; remove if present.

Installation

● Coat the full length of both propeller shafts with

Volvo Penta propeller shaft grease. ● Place remote control in the FORWARD position to lock propeller shafts. ● Install front propeller (D). ● Install front propeller nut (C) and tighten to 60 Nm. ● Place remote control in the REVERSE position to lock propeller shafts. ● Install rear propeller (B). ● Install the rear propeller nut (A) and tighten to 70

Nm.

NOTE! Failure to install propellers as shown could result in the loss of the rear propeller and damage to the drive unit when boat is operated.