Group 30: Electrical system
Malfunctions, MID 128
MID 128, PID 100 Oil pressure sensor (engine)
MID 128: Engine control unit Fault code FMI 0: The sensor value is valid but exceeds the normal working range. FMI 1: The sensor value is valid but is less than the normal working range. FMI 3: The voltage exceeds the normal value or is short circuited to higher voltage. FMI 4: The voltage is less than the normal value or is short circuited to battery negative. FMI 5: The current is less than the normal value or is open circuited. FMI 6: The current is greater than the normal value or is short circuited to battery negative. FMI 9: Abnormal updating rate. FMI
Fault code explanation
0
Too high lube oil pressure
1
Too low lube oil pressure
3, 4, 5, 6, 9
Faulty sensor / Faulty sensor circuit
Fault indication Warning is displayed in the tachometer/display. FMI 1:
Oil pressure indication in alarm display shows red. Audible warning.
FMI 0, 3, 4, 5, 6, 9: A red lamp flashes in the alarm display.
Symptom Engine power is limited.
49
