
1 minute read
Power
The Power Saving screen contains parameters that are related to powersaving and power management.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Note: If your system has ACPI, all power management functions are taken care of by Windows 98.
Parameter
LCD backlight Time-out
Description
Sets the time-out value before the display enters power saving mode. Options: Disabled or time values
Hard Disk Timeout Sets the time-out value before the hard disk enters power saving mode. Options: Disabled or time values
Standby Timeout
Sets the time-out value before the computer enters Standby mode. Options: Disabled or time values S2D Time-out Sets the time-out value before the computer enters Hibernation mode. Options: Disabled or time values
Resume on LAN access When enabled, the computer resumes operation when accessed via LAN using a remote computer. Options: Disabled or Enabled
Parameter Description
Resume On Time
When enabled and the system resume date and time are valid, the computer resumes (wakes up) at the set time and date. Options: Disabled or Enabled When enabled, the Resume Time and Resume Date parameters appear. Set the time and date the computer resumes at. Format: HH:MM:SS (hour:minute:second); DD/MM/YYYY (day/month/year) Hotkey Beep Enables or disables a beep when over a hot key is pressed. Options: Enabled or Disabled
Battery Low Warning
Battery Low Suspend Enables or disables warning beeps during a battery-low condition. Options: Enabled or Disabled Enables or disables the Hibernation function during a batterylow condition. When the computer is very low on battery power, the computer will enter Hibernation mode if PhDISK is installed and the hibernation file is valid. Options: Enabled or Disabled