Startup Configuration

The Startup Configuration screen contains parameters that are related to computer startup.

The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter Description

Boot Display Sets the display on boot-up. When set to Auto, the computer automatically determines the display device. If an external display device (e.g., monitor) is connected, it becomes the boot display; otherwise, the computer LCD is the boot display. When set to Both, the computer outputs to both the computer LCD and an external display device if one is connected. Options: Auto or Both

USB Function Support

Enables or disables the USB (Universal Serial Bus) function. Options: Disabled or Enabled Hotkey Beep When enabled, the computer gives off a beep when a hotkey (key combination is pressed). See "The Euro Symbol" for details on hotkeys. Options: Enabled or Disabled

ACPI OS Fast Boot

When set to enabled, the Quiet Boot and the PnP OS is disabled or inactive. Options: Enabled or Disabled Quiet Boot When set to enabled, the system will boot to the OS as fast as possible and proceed quickly through POST. This mode will not show any boot progression messages, nor will it perform any memory and diagnostic test. Options: Enabled or Disabled