Installation and maintenance instructions – P1

Installation of the new truck T-codeValid

0460

L2 770

GL=800GL=2350

L2=741, 0 Ah Tp=460Tp=770

L2=741, 320 Ah Tp=480Tp=690

Tp

L2=811, 0 Ah Tp=480Tp=800

L2=811, 600 Ah Tp=520Tp=700

•Secure the truck on the lifting truck's forks.

•Lift with greatest possible care.

WARNING!

Risk of tipping

The truck can tip if lifted in the wrong way. Always lift the truck secured on, and with the centre of gravity between, the lifting truck's forks.

3.1.2 Fitting the battery

Check that the battery cables are correctly connected to the battery.

WARNING! Risk of short-circuiting. An incorrectly connected battery can cause a short-circuit. The polarity must correspond. Compare the markings on the cables and the battery poles.

The battery can be replaced from both sides and from above. Depending on which side you wish to dismantle the battery, the battery lock (A) is fitted as illustrated. Also fit the fixed part (B) on the opposite side. Shims (C) are also supplied with the truck. These are used to take up any play between the battery and battery compartment wall. Fit these if necessary as illustrated.

3.1.3 Start up

The following points must be checked before the truck is used.