Introduction
Tigercat X822D/LX822D/X830D/LX830D Feller Buncher
REGULATORY INFORMATION The operator's cab is equipped with standard or optional equipment that is capable of emitting radio frequency fields. Bluetooth and WiFi exposure limits are significantly less than the maximum permitted for public use. IMPORTANT! The RemoteLog™ telematics satellite antenna is externally mounted to the operator cab. When transmitting, the external antenna should be separated from personnel by a minimum distance of 20 cm (8 in). Transmissions can be silenced by placing the telematics system in repair mode.
FEDERAL COMMUNICATIONS COMMISSION NOTIFICATIONS TO USER INTERNAL (OPERATOR'S CAB): Telematics Module (WiFi)
Contains FCC ID: VPYLB1CL or NCMOCG2101
IQAN-G11 (Bluetooth)
Contains FCC ID: VPYLBZY
Radio (Bluetooth)
Contains FCC ID: OPDJHD36A
Radio (Bluetooth)
Contains FCC ID: OPDJHD1635BT
Radio (Bluetooth)
Contains FCC ID: OPDJHD3630BT
EXTERNAL: Inmarsat Modem (Satellite)
Contains FCC ID: B92IDP1XX
Iridium Modem (Satellite)
Contains FCC ID: Q639603N
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).
INDUSTRY CANADA NOTIFICATIONS TO USER INTERNAL (OPERATOR'S CAB): Telematics Module (WiFi)
Contains IC ID: 772C – LB1CL or NCMOCG2101
IQAN-G11 (Bluetooth)
Contains IC ID: VPYLBZY
EXTERNAL: Inmarsat Modem (Satellite)
Contains IC ID: B92IDP1XX
Iridium Modem (Satellite)
Contains IC ID: Q639603N
These devices comply with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).
x
