Tigercat T250B Track Loader
Safety and adhere to. More specific measures are illustrated with pictograms which may also be attached to the machine in locations pertinent to their respective message. Keep safety labels in good condition. Repair or replace damaged labels.
GENERAL SAFETY PRECAUTIONS Remember that safety is a prime responsibility of all. To minimize the risks and promote safety at all times, this section of the operator’s manual details a number of safety rules which should always be followed and obeyed. Study all the safety messages in this manual and on the labels on the machine carefully. Follow all instructions from safety inspector and supervisors.
KEEP CLEAR When approaching an operating machine on foot, stay at least 300 feet (90M) away from the machine and all related attachments including the grapple, delimber, topping saw and ground saws until the operator recognizes your presence. Make sure that all equipment is shut down with grapple resting securely on stable ground before advancing to the machine. Always avoid the discharge path of all saws.
Operators of this equipment must be fully trained by a qualified person in safety and operating procedures. The operator must be fully aware of the capabilities and limitations of the equipment and must at no time exceed them. The machine is to be used only for its intended purpose. Learn the most efficient operating techniques.
Wear a suitable hearing protective device such as earmuffs or earplugs to protect against noise. Prolonged exposure to loud noise can cause impairment or loss of hearing.
Do not let an untrained person operate the machine.
Use the handrails and steps provided when mounting and dismounting from the machine. Do not climb onto or jump off the machine at any time. Do not use the seat armrest or joystick as handle when entering or leaving the cab.
Use recommended protective clothing and safety devices such as gloves, safety boots, safety hat, goggles, and ear protection when necessary.
When mounting or dismounting the machine always use the 3 point technique - Use one hand with 2 feet or 2 hands with one foot.
Fellow workers and other bystanders around the machine must also be provided with the appropriate safety devices mentioned above. These safety rules highlight both general and specific measures that the operator should be familiar with 1.3
