Safety
Tigercat H855D/LH855D Harvester Do not operate the machine with any defective or inoperable components.
WARNING
Check all fluid levels.
Do not walk on machine surfaces with steel cleated foot wear. Steel cleats on steel surfaces are slippery and do not provide a safe foot hold.
Do not operate the machine with any of the exhaust system, safety covers, oil shields, or other devices removed.
WARNING It is not recommended to walk on machine surfaces that are not designated walking areas. No attempt should be made to walk on angled steel surfaces or surfaces that are irregular in shape. Walking surfaces on the machine must be covered with anti-slip materials to provide a safe foot hold and prevent slipping.
Keep a first aid kit in an easily accessible location on the vehicle at all times.
These anti-slip surfaces should be maintained on a regular basis. If the surface shows signs of wear, the anti-slip material must be replaced immediately.
Direct contact with oil implies a risk of skin complaints (example: eczema). Strict hygiene should be observed.
WORKING WITH OIL
Some advice which should be observed:
To reduce risk of fire, machines should be completely cleaned of debris at least daily, particularly around the engine exhaust components. Hydraulic oil leaks, excess grease, fuel and oil accumulation (including spillage) should be eliminated immediately, shut off engine before cleaning machine.
• Oils used in this machine may be hot enough to cause serious burns. • Avoid contact with oil, particularly heated oil. • Oil on the skin should be washed off immediately with soap and water. • Wear protective gloves. Hands should be clean before putting on gloves. Apply protective cream to the hands to make washing easier.
Maintain a clean cab interior, clear away trash or debris. Machine should be washed completely at every major service.
• Do not put oily rags in your pockets.
Inspect the machine daily for signs of damage or unusual wear to structures.
• Soiled clothing should be changed as soon as possible.
Check for fluid leaks, or faulty operation. Repair or replace malfunctioning parts and systems immediately.
• Keep an extra overall handy, but not in the machine where it can become dirty. • Cuts and abrasions must be attended to immediately. Clean them and apply first-aid.
Check windows and door guards for damage.
• Avoid breathing in oil fumes.
Check protective windows for cracks, a damaged window has reduced strength to stop flying objects. All damaged windows must be replaced with original equipment.
• Wash hands and arms frequently (example: at each meal break or as often as possible). • Oily rags and gloves must be safely discarded after use.
Check windows for scratching, crazing and cloudiness that could impair clear visibility all around the machine.
Read, understand and follow all general safety precautions specified by harvesting head manufacturer.
1.6
