Safety
Tigercat H845D/LH845D Harvester AVOID INJURY FROM BACKOVER ACCIDENTS
WARNING Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
Before moving machine, be sure all persons are clear of the area. Always be alert for bystanders moving into the work area. Use horn to warn bystanders before moving the machine. When using a signal person, keep the person in view at all times. Always be sure the signal person is clear before backing up.
If acid is accidentally splashed into your eyes, flush immediately with clean water and get medical attention.
To avoid backover accidents:
Do not attempt to charge a frozen battery; it can explode.
•
Disconnect battery before working on electrical systems as follows: -
Turn off master switch in cab
-
Disconnect negative starter motor cable from both battery posts
-
•
•
Disconnect positive master solenoid cable from both battery posts
•
Connect ground terminal last when reconnecting. Do not short out battery terminals for any reason. Serious burns or an explosion can result.
•
CAUTION
•
Lead-acid batteries contain sulphuric acid which can severely damage eyes or skin on contact. Always wear a safety face shield, rubber gloves and protective clothing to reduce risk of accidents. Lead-acid batteries produce flammable and explosive gasses. Keep arcs, sparks, open flames and lighted tobacco a safe distance from the batteries.
1.8
Always look around before you back up. Be sure that everyone is clear. Keep motion warning alarm in working condition. The motion warning alarm must sound when the machine is moving in forward or reverse. Use a signal person when backing up if view is obstructed. Always keep the signal person in view. Learn the meaning of all flags, signs and markings on the job site and who is responsible for signalling. Keep windows, mirrors and lights in good condition. Dust, heavy rain, fog, snow etc. can reduce visibility. As visibility decreases, reduce speed and use proper lighting.
