Tigercat 720G/724G/726G Feller Buncher
Safety
WORKING WITH OIL
SAFETY HAZARDS – VITON SEALS
Direct contact with oil implies a risk of skin complaints (example: eczema). Always observe strict hygiene.
O-rings and other seals manufactured of Viton material (fluorine rubber) produce a highly corrosive acid (Hydrofluoric) when subjected to temperatures above 315°C (600°F).
Observe the following when working with oil: • Oils used in this machine may be hot enough to cause serious burns.
This contamination can have extreme consequences on human tissue since it is almost impossible to remove after contact.
• Avoid contact with oil, particularly heated oil. • Oil on the skin should be washed off immediately with soap and water.
The following procedures are recommended when inspecting equipment subjected to high temperatures such as fire:
• Wear protective gloves. Hands should be clean before putting on gloves. Apply protective cream to the hands to make washing easier.
• Visually inspect any seals or gaskets which have suffered from heat damage. They will appear black and sticky. If these are found, DO NOT TOUCH!
• Don't put oily rags in your pockets.
• Determine the material composition of any seals or gaskets, If fluoroelastomer seals (Viton, fluorel, or tecmoflon) have been used, the affected area must be decontaminated before undertaking further work. Natural rubber and nitrile materials are not hazardous.
• Oil soiled clothing should be changed as soon as possible. • Always keep an extra overall handy, but not in the machine where it can become dirty. • Cuts and abrasions must be attended to immediately. Clean them and apply first-aid.
• Disposable heavy duty gloves (neoprene) must be worn and the affected area decontaminated by washing thoroughly with limewater (Calcium Hydroxide solution).
• Avoid breathing in oil fumes. • Wash hands and arms frequently, for example, at each meal break or as often as possible.
• Any cloths, residue and gloves must be safely discarded after use. NOTE: Burning discarded items is not recommended except in an approved incineration process where the dangerous products are treated by alkaline scrubbing.
1.7
