Tigercat 720G/724G/726G Feller Buncher
Safety
SERVICING SAFETY PRECAUTIONS • Conduct maintenance inspections at least as frequently as recommended in SECTION 3.
• Before performing maintenance or repair work on any equipment, consult the instruction manual provided by the manufacturer and follow the recommended procedures. • Clean and service the cooler package daily to maintain moderate engine temperatures. • Read, understand and follow all operating safety precautions specified by the harvesting attachment manufacturer.
WARNING
• Before servicing the machine, allow the engine cooling system, fuel system, exhaust system, hydraulic system and machine surfaces to cool down.
A
• Use a thermometer to check surface and system temperatures to ensure it is safe to begin service work.
724G-095
A Battery Disconnect Switch
• When servicing or repairing equipment, turn OFF the engine, turn OFF the battery disconnect switch and lock out the switch in accordance with local regulations.
• DO NOT begin service work until the surface or system temperature has cooled down to below 38°C (100°F).
WARNING
• Before servicing the machine, remove the negative (−) battery terminal cable (to the starter motor) from the battery. Diesel fuel or hydraulic fluid under pressure can penetrate the skin and cause serious personal injury, blindness, or death. If any fluid is injected into the skin, it must be surgically removed within a few hours by a doctor familiar with treating this type of injury.
• When service is complete, connect the negative (−) battery terminal cable and turn ON the battery disconnect switch. • Install a DO NOT START ENGINE sign on the operator cab door and in the engine compartment when making repairs to the machine.
• Never use your bare hand to check for fluid leaks.
1.15
