OPERATIONAL PERFORMANCE TEST /System performance

Measurement:

1. Accelerator Pedal:Full Stroke(Engine at Fast Idle),Parking Brake Switch:ON,FNR Shift Lever:N(Neutral)

2. Operate each cylinder as follows (including the cushion stroke range):

(1) When measuring the lift cylinder: While moving the lift arm lever full stroke, measure the time required to raise or lower the lift arm. In addition, measure the time required to lower the lift arm from the maximum raised position to the ground with the lift arm lever in the FLOAT position.

(2) When measuring the tilt cylinder: While moving the tilt lever full stroke, measure the time required to tilt or dump the bucket.

(3) When measuring the steering pump: While turning the steering wheel full stroke, measure the time required to fully steer the machine from the right to the left and vice versa.

3. Repeat measurement three times and calculate the average value.

Evaluation: Refer to the Performance Standard Table

Remedy: Refer to Troubleshooting