OPERATIONAL PERFORMANCE TEST /System performance

Travel Speed

Summary: Measuring travel time checks overall performance of the travel driving system (between the HST pump and the HST motor).

Preparation:

1. Inflate all tires to equal air pressure:

Air Pressure: 220 kPa(2.2 kgf/cm2)

2. Prepare a level and solid test track 20 m (65 ft) straight with an extra length of 20 m (65 ft) on both ends for acceleration and deceleration.

3. Hold the empty bucket 0.4 m (1.3 ft) above the ground with the lift arm.

4. Maintain the hydraulic oil temperature at 50 ± 5 ℃ (122 ± 9°F)

5. Please also sufficiently warm up the oils for axle and reduction.