COMPONENT OPERATION ／ BRAKE

・Service brake is released

1.When the brake pedal (1) is released (either right or left), the push rod (3) is returned to its original position and a piston in the master cylinder (4) is also returned to upward. Consequently the brake oil pressure in the chamber (5) is released.

2.The service brake piston (6) becomes free and the brake disks (7) are released.

3.At the same time, the HST pump inching valve (2) lever is returned to its original position and the inching (HST brake) function is released.

4.The stop lamp switch (8) is turned OFF and so the stop lamp is turned OFF.