844/642 Telehandler LIFT CYLINDER REMOVAL

Step 21

Step 24

To aid in installing the lift cylinder rod (upper) end, obtain a round metal bar with a diameter just small enough to allow easy insertion through the rod end. It should also be short enough to fit between the lift cylinder mounts on the outer boom but longer than the width of the lift cylinder rod end. This temporary pivot pin will hold the spacers in position while the lift cylinder is secured to the boom with the actual rod end pivot pin.

Step 25

Step 22

Step

STEP

Template Name: OML_2_col 907871

Template Date: 1994_04_22