1500R, 1500R (EU), 1500R X-SERIES - ELECTRICAL BACKUP CAMERA (OPTION)
17
CAB UPPER CROSSMEMBER
FASTEN CAMERA MTG PLATE TO THE CAMERA BASE BRACKET SO THAT THE FLATTENED SURFACE OF THE CAMERA BODY IS FACING UPWARD
REMOVE PLUG 16 FROM REAR DOOR
9 7
4
14
6 12
3 EXISTING CROSSMEMBER FASTENER SHOWN
10 SEE NOTE 1
15 15
13
18
8
18 15
20
19
15
11
5
20
2 USE NYLON TIES TO SECURE CAMERA HARNESS ALONG ITS ROUTED PATH 1
13
NOTES: 1. CONNECT 2-PIN CONNECTOR OF CAMERA SYSTEM POWER HARNESS TO THE MATING CONNECTOR IN THE CAMERA CABLE. REMOVE THE QUICK-DISCONNECT TERMINALS OF THE CAB HARNESS FROM THE REAR OF THE 12V POWER SOCKET IN THE CAB'S RH INSTRUMENT PANEL. CONNECT THE TERMINALS JUST REMOVED TO THE MATING (MALE) TERMINALS OF MATCHING COLOR IN THE CAMERA SYSTEM POWER HARNESS. PRESS THE OPEN RECEPTACLES REMAINING IN THE CAMERA SYSTEM POWER HARNESS ONTO THE TERMINALS OF THE 12V POWER SOCKET.
50441335-B
50940344/E0419
128
Printed in U.S.A.
