Controls

Multi-Function Display Screens

The multi-function display screens provide the following functionality:

•Displays operational status such as engine RPM, coolant temperature, service hours and system voltage.

•Displays error fault codes.

•Configures displays settings.

•Configures control options.

•Audible alerts for selected error conditions.

Screen Access

Z

•Press button to scroll through screens/ selections.

•Press and hold button to access and select configuration functions.

Press and release the multi-function display interface button (Z, Fig 7) to scroll through the status screens and any current error or maintenance required screens.

Press and hold the interface button for 5 seconds to display the configuration selection screens and to select a particular setting (page50).

Status, Maintenance and Error Code Screens

Table 24: Status, Maintenance and Error Code Screens

ScreenAccess/Description

Status Screens

Coolant Temperature Screen

Default screen when no error codes are active.

Press and release interface button (Z, Fig. 7) as many times as required to access this screen. Displays coolant temperature in “°F” or “°C”, depending upon units selected in Temperature Units Configuration screen (M).

Engine RPMs Screen

Press and release interface button (Z, Fig. 7) as many times as required to access this screen. Displays engine crankshaft revolutions per minute.

Battery Voltage Screen

Press and release interface button (Z, Fig. 7) as many times as required to access this screen. Displays battery charge in volts.

Accumulated Service Hours Screen

Press and release interface button (Z, Fig. 7) as many times as required to access this screen. Displays accumulated operation time in hours. Time accumulates when engine is running.

Table 24: Status, Maintenance and Error Code Screens

ScreenAccess/Description

Low Fuel Screen

Automatically displays when the fuel level is low.

Required Maintenance and Error Code Screens

Maintenance Required Screen

Displays in the screen rotation along with status screens when scheduled maintenance is required. See page “Maintenance Schedule” on page118.

To dismiss this screen, press and hold the interface button (Z, Fig. 7). This screen will display in rotation when scrolling through the status screens. After 1 full rotation of all screens, the display will freeze on this screen.

Engine Error Code Screen

Displays in the screen rotation along with status screens when engine errors occur. See “Engine Error Codes” on page166.

Up to 3 errors can be displayed on a single screen; additional screens are displayed if more than 3 errors occur.

The error code screen is dismissed when the underlying problem is solved -error code screens take precedence over other screens.

Drive / Valve Error Code Screen

Displays in the screen rotation along with status screens when drive / valve system errors occurs. Up to nine drive / valve error codes can be displayed. See “Drive and Valve Error Codes” on page174.

Limp Mode Activated Screen

Limp mode allows limited drive function when drive system errors (3-10) occur which disable able the drive system for safety reasons. Two limp mode codes can be displayed –”38” and “39”. See “Travel Drive Error Condition Operation (Limp Mode)” on page91.

Module Communication Error Code Screen

Displays in the screen rotation along with status screens when module communication errors occurs. Up to nine module communication error codes can be displayed.

DPF Stationary Regeneration Request Screen

Models 1750RT (Serial Numbers 131001 and Up) and 2100RT (Serial Numbers 241001 and Up)

Displays when stationary Diesel Particulate Filter (DPF) regeneration is required. See “Diesel Particulate Filter (DPF) Regeneration Procedures” on page75.

DPF Filter Ash Cleaning Required

Models 1750RT (Serial Numbers 131001 and Up) and 2100RT (Serial Numbers 241001 and Up)

Displays when Diesel Particulate Filter (DPF) core exchange is required. See “Diesel Particulate Filter (DPF) Regeneration Procedures” on page75