1 minute read
Controls
from Mustang 1750RT 1750RT NXT2 2100RT 2100RT NXT2 2500RT Compact Track Loader Operator’s Manual 50940163
NOTE: Error codes remain displayed even if they are no longer active. To determine if an error is still active, press and release the multi-function button several times to refresh the display. If the error is no longer active, the code(s) will not reappear in the screen rotation.
Configuration Screens
Table 25: Configuration Screens
ItemAccess/Description
Configuration Selection Screens
Configuration Selection Screens
To access these screens, press and hold interface button (Z, Fig. 7) for 5 seconds. Press and release interface button (Z, Fig. 7) to move selection caret (A) down through the configuration selections. Press and hold interface button for 5 seconds to go to the configuration screen selected by selection caret (A).
To exit the configuration selection screens, move selection caret (A) to the “EXIT” option and press and hold interface button for 5 seconds.
DPF Regeneration Configuration Selection Screen
Models 1750RT (Serial Numbers 131001 and Up) and 2100RT (Serial Numbers 241001 and Up)
To access this screen, press and hold interface button (Z, Fig. 7) for 3 seconds. Press and release interface button (Z, Fig. 7) to move selection caret (A) down through the selections to the DPF regeneration configuration selection. Press and hold interface button for 5 seconds to go to the DPF regeneration configuration screen.
To exit the configuration selection screen, move selection caret (A) to the “EXIT” option and press and hold interface button for 5 seconds.
Configuration Screens
Control Sensitivity Configuration Screen
To change joystick control sensitivity, press and release interface button (Z, Fig. 7) to scroll through selections and change control sensitivity. With the caret closer to the symbol, joystick control becomes increasingly aggressive and immediate; with the caret closer to the symbol, joystick control becomes less aggressive and more relaxed.
Control sensitivity configuration changes are saved when exiting this screen. To exit this screen, press and hold interface button for 5 seconds.
