6.2 Series-dependent approval of fuel grades for MTU engines 6.2.1
Distillate fuels as per DIN EN590 and ASTM D975 Commercially available diesel fuels meeting the following specifications are approved for use:
New series Fuel specifications
DIN EN 590: 2014-04 Summer and winter quality
ASTM D975-16 Grade 1-D S 15, S 500, S 5000
ASTM D975-16 Grade 2-D S 15, S 500, S 5000
Restrictions
- SOLAS: Flashpoint min. 60 °C - Particle distribution for fuel in acc. with table 24 (→ Page 38)
- SOLAS: Flashpoint min. 60 °C - Density: 0.820 to 0.860 g/ml* * = deviating values: Approval possible projectspecifically. If the density is too low, this can result in a power reduction. In the framework of power readjustment, it is possible that the engine operational values change - Proportion of water: Max. 200 mg/kg - Total contamination: Max. 24 mg/kg - With exhaust aftertreatment: Sulfur content max. 15 mg/kg - Particle distribution for fuel in acc. with table 24 (→ Page 38)
Approved
Approved
Approved
Approval issued if: - viscosity min. 1.5 mm2/s - cetane number min. 45 or - cetane index min. 42 - sulfur content max. 500 mg/kg
Approval issued if: - cetane number min. 45 or - cetane index min. 42 - sulfur content max. 500 mg/kg
Approval issued if: - viscosity min. 1.5 mm2/s - cetane number min. 45 or - cetane index min. 42 - sulfur content max. 15 mg/kg
Approval issued if: - cetane number min. 45 or - cetane index min. 42 - sulfur content max. 15 mg/kg
Series S60
2000Cx0, Cx1, Cx2 with- Approved out exh. aftertreatment 2000Gx5, Gx6 without exh. aftertreatment
Approved
2000Mx0, Mx1, Mx2, Mx3, Mx4, Mx6 without exh. aftertreatment
Approved
2000Px2 without exh. af- Approved tertreatment 2000Cx6
Approved
2000Sx6
Approved
TIM-ID: 0000057587 - 003
2000Mx6 with exh. after- Approved treatment 2000Gx7 with exh. after- Approved treatment
A001061/37E 2016-12 | Series-dependent approval of fuel grades for MTU engines | 43
