GUZum_breva750USA_####.book Page 34 Thursday, June 29, 2006 12:31 PM
MAIN INDIVIDUAL CONTROLS
3
5
4
3) LIGHT DIMMER ( ) Set to " " to enable the high beam; set to " lowbeam headlight.
" to enable the
4) HIGH BEAM FLASHER BUTTON ( ) This allows you to flash the high beam in case of danger or emergency.
NOTE
Release the button to stop flashing the high beam.
5) COLD START LEVER ( ) Turn the lever ( ) downward to activate the starter for cold starting the engine. To shut off the starter, return the lever ( ) to its original position.
1
2
CONTROLS ON THE LEFT SIDE OF THE HANDLEBAR
NOTE
The electrical components only work with the ignition switch set to “ ”. 1) HORN BUTTON ( ) When pressed, it activates the horn. 2) DIRECTIONAL INDICATOR SWITCH ( ) Move the switch to the left to indicate a left turn; move the switch to the right to indicate a right turn. Press the switch to turn off the directional indicator.
NOTE If the turn signal LED is flashing rapidly, this means that one or both of the turn signal bulbs are burnt out. See page 105 (CHANGING THE FRONT AND REAR DIRECTION INDICATOR LAMPS) for instructions on how to replace them.
34
use and maintenance Breva 7
