1 minute read
Turning the steering wheel when the bus is stationary
Press the upper section of switch (1). The steering wheel and instrument panel are locked in their current position. Driver's area controls
Turning the steering wheel when the bus is stationary
Observe the instructions and information.
Note:
To prevent damage to the steering column, the following points must be observed when turning the steering wheel with the bus stationary, without hydraulic support (engine switched off) and without a turntable under the front wheels (tyres in direct contact with the ground):
Release the steering wheel adjuster and push the steering wheel fully down. Lock the steering wheel adjuster in place. Turn the steering wheel using both hands placed apart at an angle of between 90° and 180°.
Caution:
Never have more than one person turn the steering wheel. Do not pull the steering wheel on one side only.
Note:
We ask the workshop in particular to note this.
