1 minute read
Deactivating the Electronic Stability Program (ESP
Note:
The illustration shows a 2-axle bus as an example. In the case of 3-axle buses equipped with RAS, the 3rd axle is regulated separately as necessary. Operation
Deactivating the Electronic Stability Program (ESP)
M54.00-1837-71
Press ESP OFF pushbutton (3).
Note:
Pressing “ESP OFF” pushbutton (3) again or switching the ignition starter switch to OFF and back to ON reactivates the Electronic Stability Program (ESP).
Danger.
RISK OF ACCIDENT. The bus may skid out of control if the Electronic Stability Program (ESP) has been deactivated and the drive wheels start to spin.
Note:
It is recommended that the Electronic Stability Program (ESP) be deactivated using ESP OFF pushbutton (3) if traction problems are experienced when driving with snow chains fitted or over loose surfaces (e.g. sand or gravel).
