Removing intake and drain filter

INTAKE FILTER

- Raise the boom. - Remove the filter and the drain cap to empty the fluid tank completely. - Wash the tank thoroughly with kerosene, dry it and remove internal dirt. - Remove the filter element (Fig. 8). - Install a new filter element. - Completely refill the tank with hydraulic fluid.

HYDRAULIC SYSTEM FILTER (DRAIN)

- Raise the boom. - Remove the filter cartridge (Fig. 9) and replace it with an original spare part.

HYDROSTATIC SYSTEM FILTER (INTAKE)

- Remove the protective guard - Remove the filter cartridge (Fig. 10). - Replace the cartridge full of fluid and replace it with an original spare part. - Start up the machine and leave the engine to idle at minimum rpm for 1-2 minutes. - Perform the first movements in both directions, keeping the engine at minimum rpm.

Fig. 8

Fig. 9

Fig. 10