Lubrication Oil

NOTE: Do not use diesel fuel with sulphur content more than 15 ppm.

NOTE: It is not necessary to change the lubricant when the temperature enters into a different range during a working day, unless difficulty in starting is experienced. Change oil if the tractor is not used for 6 months.

PRECAUTIONS :

After changing the oil, operate the engine at low speed without load, for at least 5 minutes. This will allow the oil to work into the bearings and onto the cylinder walls.

*Factory filled oil is 15W40-CJ4 and may change in future.

From first Service onwards 15W40-CJ4 Oil to be used.