Lubrication Oil

Transmission, Hydraulics and Oil Immersed Brakes

Use mild EP type gear lubricant. They should meet API GL4 performance category with suitable additives compatible for paper based brake liner and taking care of noise. Use viscosity based on the expected air temperature range during the period between oil changes.

Please refer Oil Specifications Chart for oil specifications at different range of ambient temperatures.

Following oils are recommended.

1.GULF Universal Tractor Transmission Fluid

2.Exxon Torque fluid 56

3.Shell Donax TD

4.Mobil fluid 424

5.Tractelf BF 12

6.Tractelf C4 - 1000

7.Hydro Clear Power Train Fluid

Other brands may be used if they meet all the specifications and performance levels of the above.

Chassis Lubricant (CL)

Use good grade of grease designed for pin and bushings on agricultural equipment. Lithium or aluminum complex type grease with high viscosity base oil, tackiness and molybdenum disulphide are suitable. Grease approved for the NLGI certification mark GC-LB are recommended.

Grease must be SAE Multipurpose High Temperature Grease with Extreme Pressure (EP) performance and capable of operating at assembly temperatures above 150°C (302°F) Depending upon the expected ambient temperature range during the service interval, use grease as shown on the Oil Specifications Chart.

Front Axle

Use gear oil complying to API GL5, MIL-L-2105D specifications. Please refer Oil Specifications Chart for oil viscosity grade at different range of ambient temperatures. Following oils are recommended,

1.Chevron RPM Universal Gear Lubricant SAE 80W90

2.Texaco Havoline Gear Oil 80W90

3.Total Transmission DA 80W90

4.Shell Spirax Heavy Duty 80W90

5.Mobilube HD Plus 80W90

Note : Universal Tractor Transmission Oil. Oil shall meet API GL4 performance category. Factory filled oil is Tractelf MM H3 and is subject to change in future.

Grease TypeTemperature Limits

Arctic GreaseBelow -30°C (-22°F )

SAE (NLGI) #0-30°C to 10°C (-22°F to 50°F)

SAE (NLGI) #1-20°C to 20°C (-4°F to 68°F)

SAE (NLGI) #214°F to 122°F (-10°C to 50°C)

* Factory filled oil is SAE80W90EP complying to API GL5, MIL-L-2105D specifications and is subject to change in future.