Control and operation

Menu "Check"

With the menu "Check", you can see the value of different parameters and specified inputs/outputs of the machine.

Push the "Check" button to access to this menu from the main screen.

Menu "Info"

With the menu "Info", you can see different technical data and working times of specified parts of the machine.

Push the "Info" button to access to this menu from the main screen.

Menu "Settings"

With the menu "Settings", you can set specified parameters of the machine.

Push the "Settings" button to access to this menu from the main screen.

Select a submenu

From each monitoring menu:

Push the "Up" and "Down" buttons to select the necessary submenu.

Push the "Accept" button to access to the selected submenu.

Return to the monitoring menu

From each submenu:

Push the "Return" button to go back to the related monitoring menu.

Menu "Diag"

When an error occurs on the machine, the symbol of the menu "Diag" flashes red on the main screen. This symbol continues to flash until there are errors not acknowledged or not rectified.

Push the safety lever up to see the error messages. A code number and a short description are shown for each error code.

Push the "Up" and "Down" buttons to select an error message.

Push the "Acknowledgement" button to acknowledge the error.

Danger!

If the error shown on the display is not rectified immediately, this could cause injuries to persons or damages to the machine.

Rectify / have the error rectified immediately.

If you want to change the language of the messages: Refer to the menu "Settings".

Menu "Check"

This menu gives access to the submenus that follow: