Control and operation

Access and equipment of the cab

Danger!

Close to operating temperatures, the elements of the heater system and the hydraulic system can reach extremely high temperatures. Do not touch any parts containing fluids or oil. There is a risk of injury from burns.

Check the heater fluid level only after the lid of the expansion vessel has cooled down so that it can safely be touched by hand. Turn the lid carefully to relieve the overpressure.

Prior to commissioning

1 Expansion tank 20 Plug 10 Heating box S206 Button

Filling expansion tank 1 with corrosion inhibitor and antifreeze agent: Open the plug 20

Fill the expansion tank 1 with corrosion inhibitor and antifreeze agent: Close the plug 20

Filling heating system: Press and hold the button S206. The booster pump is working. The heating system is filled.

When corrosion inhibitor or antifreeze agent flows to the centre piece of the undercarriage:

Release the button S206 by

Preparation of heating system

Preparation of heating system

Set the switch S206a to position 1 (ON)

Turn the switch S206b to the desired power level 1 (6kW) or 2 (12kW)

Switching off heating system

Set the switch S206a to position 0 (OFF)

Switching heating system on/off

Switching on heating system

Press the button S180

The indicator light in the button is on. The heating system ist now powered on.

Switching off heating system

Press the button S180

The indicator light in the button is off. The heating system is powered off.