Control and operation

S10 – Working floodlights

Press the touch. Each touch actuation will successively: turn on the uppercarriage floodlights (LED 1 illuminates), turn on the attachment floodlights (LED 2 illuminates) switch off the uppercarriage floodlights (LED 1 go out), turn on both the uppercarriage and the attachment floodlights (LEDs 1 and 2 illuminate), switch off both the floodlights on the uppercarriage and the floodlights on attachment (LEDs 1 and 2 in the touch go out).

S11 – Windshield washer

Press the touch and keep it depressed: washer fluid is sprayed onto the windshield, the windshield wiper runs continuously. Release the touch: the washer fluid spraying is stopped, the windshield wiper will stop after approx 3 seconds.

Windscreen washing fluid container

Fig. 3-6 Windscreen washing fluid container

The container for the windscreen washing fluid is located at the rear of the cab. Once the cover (see arrow) has been opened, the container can be refilled with ordinary windscreen washing fluid.

For the machines equipped with a cab elevation, fill the container with precaution. Risk of tumble. Respect the local rules and safety instructions for the works in altitude.

Volume: see lubricant chart

S14 – Windshield wiper

Press the touch: the windshield wiper is turned on in intermittent mode, LED I in the touch illuminates.

Press the touch again: the windshield wiper is turned on in continuous, LED C in the touch illuminates and LED I goes out.

Press the touch again: the windshield wiper is switched off, LED C in the touch goes out.

The touch S14 also allows to adjust the pause time for the intermittent mode of the windshield wiper: press the touch to select the intermittent mode and keep the touch depressed, after a few seconds the LED I starts blinking rapidly, release the touch as soon as the blinking duration has reached the desired pause time (settings from 2 - 9 seconds).

S17

– Preselection of swing brake operating mode

Press the touch: LED in the touch illuminates, the swing brake is applied.

Press the touch again: LED in the touch goes out, the swing brake is switched in semi automatic operating mode. In this mode the brake is controlled depending on the position of the rocker switch S57 situated in the right joystick lever.

S18 – Overload warning device (optional equipment)

Press the touch: LED in the touch illuminates, the overload warning device is activated.

Press the touch again: LED in the touch goes out, the overload warning device is deactivated.

If no overload warning device is installed or if it is not correctly initialized on the machine: the indicator symbol "No overload warning device recognized" will appear on the monitoring display at warning device activation (LED in the touch illuminates).