Control and operation

There are 3 possible choices in this menu: list Exxx, all the operating faults detected by the switches and sensors monitoring the machine parameters are listed. list E-elec, all the electrical system errors (cable errors, sensor errors, ...) detected during the operation of the machine are listed.

list S-Exxx, all the operating faults are listed, just as with the selection list Exxx, but this time only faults which appeared when the service connector was connected .

To select the desired error type:

Press the Down or Up arrow key: the previous, respec. the next error typ is preselected

Press the Menu key. The sub-menu on a black background will be displayed. If more than 6 error codes are listed, use the arrow keys Down or Up to scroll in the list.

Select list Exxx

Press the Menu button: the first page of the sub-menu appears.

All the operating faults are listed with their error code and number of occurences.

Select the desired error code using the Down or Up arrow key.

Press the Menu key again: the second page of the sub-menu appears.

A screen appears with the operating hours and the duration for the ten first and the ten last occurrences of the selected error.

Press the Back key: the first page of the sub-menu appears.

Press the Back key again, to select another error type, or press the Down or Up arrow key, to preselect another error code.

The asterisk "*" shows that the error was also indicated by the buzzer and then acknowledged using the Back key. .

Note!

Only operating faults with an error code E 5xx are displayed in the list Exxx menu.

Press the Back key. The first page of the sub-menu appears.

Press the Down or Up key to select a new error code or press the Back key again to select another error type .

"list E-elec.": Errors of the electrical system

Select "list E-elec."

Press the Menu key: the sub-menu is entered. The screen displays the list of all electrical errors with their error code. deletion.

The hour information "reset test at x Hrs" (eg. 12Hrs) indicates the operating hour in which the "Test" column was the last time deleted.

Press the Back key to return to the first page of the sub-menu.

Press the Down key and then the Menu key to confirm the new choice.

"list S-Exxx": Operating faults in service mode

No information will be displayed in this menu if the service connector is not connected.