SSM60 & SSM72 (SZ330) PERIODICAL INSPECTION TABLE





IMPORTANT:• Above mentioned service intervals are for normal usage. If working conditions are harder, earlier service is recommended.

• If special skill or special tool are required or you feel difficulty in maintenance, consult your dealer

CHAPTER 6. STORAGE

1. Remove mower from Zero turn mower

2. Clean mower deck. Take special care to remove grass and dirt from blades and underside of mower deck.

3. Check each part for damage. Damaged parts should be repaired or replaced in preparation for next season.

4. Also clean underside of discharge cover of accumulated grass and dirt.

5. Remove grass or other objects tangled around rollers and shafts.

6. Remove belt covers and clean mower deck top. Be sure to remove grass and other objects tangled around pulleys and shaft

7. Check V-belt and loosen adjustable tensioner.

8. Remove all rust and touch up where paint has peeled off with touch-up paint supplied by ISEKI.

9. Store mower in a dry place with wooden blocks placed under it and cover with tarpaulin.

10. Grease all grease points and check bearings.

IMPORTANT: Insist on ISEKI genuine parts when replacing.

CAUTION: When storing the mower deck installed on the zero turn mower, be sure to lower it on ground to prevent unexpected accidents caused by manipulation of the lift lever by children or unauthorised people.

Improper discharging