Overview 1.4 Instructions for using this documentation
1.3.8
Spare parts list The Spare parts list contains all available genuine spare parts, and ordering instructions.
1.4
Instructions for using this documentation These operating instructions are not a training manual for prospective crane operators. All descriptions are written explicitly for crane operators who have been trained to operate truck cranes. This operating manual is for reference; it contains brief or detailed explanations of operating steps and procedures and depends on the foreknowledge of the crane operator.
1.4.1
How are the operating instructions laid out? The operating instructions consist of Part 1 - Driving and Part 2 - Crane operation. However, Part 1 or Part 2 alone do not represent complete operating instructions; always make sure you keep both parts in the truck crane. The basic safety measures, including for crane operation, as well as general information are found only in Chapter 1. The individual parts consist of the following: – The descriptions of the operating and control instruments, their designation, location and function – The checklists, which describe the required crane mode or rigging mode The individual rigging steps are listed in the correct order for extensive rigging procedures. The accompanying step-by-step instructions are referred to in the individual points. These descriptions look at the individual rigging steps in detail and give the necessary warnings and safety instructions.
1 - 10
31.01.2006
G S
The checklists and the step-by-step instructions should always be considered as a single unit for the complete description of a rigging procedure. A step-by-step instruction on its own will always describe only one individual rigging step in detail. The necessary rigging steps for the complete rigging procedure and their order can only be found in the checklist.
3 112 248 en
Operating instructions GMK 7450
