TMS700E OPERATORS MANUAL

Where wear pads are used, cycle the components and relubricate to ensure complete lubrication of the entire wear area.

SymbolDescription

AFCAntifreeze/Coolant - 50/50 Blended, Fully Formulated - SAE Grade J1941

EOEngine Oil - SAE 15W-40, API Service Classification CJ-4. (CI-4 for pre-2007 ISM engines)

EP-MPGExtreme Pressure Multipurpose Grease - Lithium Soap Base, NLGI Grade 2.

SGL-5Synthetic Gear Lubricant - SAE Grade 50, API Gravity 23.

HYDOHydraulic Oil - Must meet John Deere Standard JDM-J20C, Allison C4, and ISO 4406 level.

SSGL-5Semi-Synthetic Gear Lubricant - SAE Grade 80W-90, API Service Designation GL-5.

ASCAnti-Seize Compound - Military Specifications MIL-A-907E.

EP-OGLOpen Gear Lubricant - Fucs Ceplattyn 300 Spray, NLGI Class 1-2

EPGL-5HExtreme Pressure Gear Lubricant - SAE Grade 80W-140

SCASupplemental Coolant Additive

The following describe the lubrication points and gives the lube type, lube interval, lube amount, and application of each. Each lubrication point is numbered, and this number corresponds to the index number shown on the Lubrication Chart (refer to Figure 5-1 through 5-3, Table 5-1 and Table 52).

Caution

The following lube intervals are to be used as a guideline only. Actual lube intervals should be formulated by the operator to correspond according to conditions such as continuous duty cycles and/or hazardous environments.