SAFETY Â Walk around the machine and warn all personnel
 DO NOT exceed the machine’s rated operating
who may be servicing the machine or who are in the machine path prior to starting. DO NOT start until all personnel are clearly away from the machine.
capacity for the type of attachment tool being used.
 DO NOT allow minors or any unqualified personnel to operate or be near the machine unless properly supervised.
 DO NOT start the engine or operate any controls
Operation Safety Reminders
unless properly seated in the operator’s seat!
 Any or all of the following elements: terrain,
 DO NOT run the engine in an enclosed area with-
engine speed, type of load being carried and placed, improper tire inflation, weight of the attachment tool, and abrupt movement of any control lever may affect the stability of the machine. IF YOU ARE NOT CAREFUL WHILE OPERATING THIS MACHINE, ANY OF THE ABOVE FACTORS COULD CAUSE THE MACHINE TO TIP AND THROW YOU OUT OF THE OPERATOR’S STATION, WHICH MAY CAUSE SERIOUS BODILY INJURY OR DEATH! Â ALWAYS wear the seat belt provided to prevent being thrown from the machine. If you are in an overturn: - DO NOT jump! - Hold on tight and stay with the machine! - Lean away from the fall! Â ALWAYS keep hands, feet and arms inside of the operator’s station when operating the machine!
out providing proper ventilation for the exhaust. Exhaust gases contain carbon monoxide, an odorless and deadly gas. Internal combustion engines deplete the oxygen supply within enclosed spaces and may create a serious hazard unless the oxygen is replaced. This includes the atmosphere within the cab when provided.
 DO NOT leave the operator’s station with the boom and attachment tool raised. ALWAYS lower the boom and attachment tool to the ground, shut off the engine and engage the parking brake BEFORE leaving the operator’s station.
 DO NOT drive too close to an excavation or ditch. BE SURE that the surrounding ground has adequate strength to support the weight of the machine and the load it is carrying.
 DO NOT turn quickly while traveling on a slope or operate the machine beyond the grade and slope limits noted in the OPERATION AND ADJUSTMENT chapter of the Operator’s Manual.
 ALWAYS look in the direction of travel. Look to the rear before backing.
 ALWAYS use the recommended hand holds and
 NEVER allow any riders on this machine or use as
steps with at least three points of support when getting on and off the machine. Keep steps and platform clean. Face the machine when climbing up and down.
a lift for personnel. This is strictly a single seat, NO passenger machine!
 When road travel is required, know and use the signaling devices on the machine. Provide an escort and Slow Moving Vehicle (SMV) emblem when required.
 DO NOT raise or drop a loaded fork or bucket suddenly. Abrupt movements under load can cause serious instability.
 If necessary to park on a grade, park across the
 Study the load chart carefully. It shows maximum
slope and block the wheels.
capacity to be lifted and placed at specific outward and upward distances. ALWAYS be aware of load weights prior to attempting lift and placement with this machine. 908494/BP0204
10
PRINTED IN U.S.A.
