CHAPTER 4 SAFETY

The above Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! It stresses an attitude of ‘‘Heads Up for Safety’’ and can be found throughout this Operator’s Manual and on the machine itself.

BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT, READ AND STUDY THE FOLLOWING SAFETY INFORMATION. IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS WITH THIS EQUIPMENT, WHETHER FAMILY MEMBER OR EMPLOYEE, IS FAMILIAR WITH THESE SAFETY PRECAUTIONS.

Our Company ALWAYS takes the operator and his/her safety into consideration when designing its machinery and guards exposed moving parts for his/her protection. However, some areas can NOT be guarded or shielded in order to assure proper operation. In addition, this Operator’s Manual and Decals, on the machine, warn of further danger and should be read and observed closely.

Danger

‘‘DANGER’’ indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Warning

‘‘WARNING’’ indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Caution

‘‘CAUTION’’ indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. May also alert against unsafe practices.

Mandatory Safety Shutdown Procedure

BEFORE unclogging, cleaning, adjusting, lubricating or servicing the unit:

1.Disengage the tractor PTO.

2.Shut off the tractor engine, place the tractor transmission in park and/or lock brake pedals to prevent any tractor movement.

3.Remove the starter switch key and take it with you when leaving the tractor seat.

4.Wait for all movement to stop.

5.Remove the Telescoping Drive and ALL Power connections from the tractor.

ONLY when you have taken these precautions can you be sure it is safe to proceed. Failure to follow the above procedure, could lead to death or serious bodily injury.

Additional Safety Reminders

Some photographs, used herein, may show Doors, Guards or Shields open or removed for illustration purposes ONLY! BE SURE that all Doors, Guards or Shields are in their proper positions and securely attached BEFORE operating this unit!

BE SURE the Hitchjack Locking Pin is completely engaged and that the machine is properly blocked and prevented from rolling BEFORE disconnecting the unit from the tractor!

ALWAYS wear Safety Glasses with Side Shields when striking metal against metal! In addition, it is recommended that a softer (non–chipable) material be used to cushion the blow. Failure to heed could result in serious injury to the eye(s) or other parts of the body!

NEVER use your hands to search for hydraulic fluid leaks; use a piece of cardboard. Escaping fluid under pressure can be invisible and can penetrate the skin and cause serious injury! If any fluid is injected into your skin, see a doctor at once! Injected fluid MUST BE surgically removed by a doctor familiar with this type of injury or gangrene may result.