3 Planning of bodies 3.4 About vehicle body incline 3.4 About vehicle body incline • When mounting the rear body onto the chassis, take care to evenly balance weight on the left and right sides. If there is a difference in weight between the left and right sides, adjust by adding counterweights or spacers on the sub-frame. Modification of axles suspension, including removal or replacement of individual spring leaves, is prohibited. Also, use the chassis height adjustment shims (4.5mm {0.18in.} thickness) set on the front and rear springs. Shim
• The following are target reference values for tilting the body of an assembled vehicle. • Left-right weight difference |HfL - HfR| d 10mm {0.39in.} |HrL - HrR| d 10mm {0.39in.} • Front-back deviation |(HfL - HfR) - (HrL - HrR)| d 10mm {0.39in.} HfL: Center height of headlamp (left side) HfR: Center height of headlamp (right side) HrL: Lower height of rear end of body outer panel (left side) HrR: Lower height of rear end of body outer panel (right side)
MFTBC Part No. MC110153 MB161776
Front Rear Spacer Specification Material
Thickness (mm{in.})
Finish
SS400(JIS G3101) E275A(ISO 630) S275JR/JO(EN10025) SUP9(JIS G4801) 55Cr3(ISO683-14) or equivalent
4.5 {0.18}
Painting for rust prevention
i
Mitsubishi Fuso body/equipment mounting directives for FE, FG Issue date: 16. 05. 2011 ! Only print out complete sections from the current version
25