Checklists

AFTER -SALE CHECK LIST

It is suggested the following items be checked sometime during the first six months operation of the Disk. Check the entire disk for loose or missing hardware.

Check for broken or damaged parts. Make necessary repairs.

Re -torque the hardware.

Safety chain is properly installed.

If possible, run the disk to see if it is functioning properly.

Review the entire operator’s manual with the customer and stress the importance of proper and regular lubrication and safety precautions.

Advise the customer of optional attachments that are available.

(Date Checked):

(Signature):

Each Morning Of Operation Checklist

Lubricate items required daily and those whose lubrication time is due.

Look for loose or missing bolts or parts.

Check hydraulic system for leakage.

Check tire pressures and wheel bolts.

Check all pins to be sure that retaining hardware is in place.

Check all bearing assemblies and grease as necessary.

Be sure that all gang components are tight on the axles and axle nuts meet the recommended torque foot-pound pressure specified in the Axle Nut Torque Chart.

Before Each Season Checklist

Be sure recommended lubrication has been performed.

Inspect all bearings to be sure they are tight and not badly worn.

Check hydraulic system for proper operation and leakage.

Check tire pressures and wheel bolts.

Be sure the proper operating adjustments have been made for your conditions.