Startup Configuration The Startup Configuration screen contains parameters that are related to computer startup.
The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Parameter Boot Display
Description Sets the display on boot-up. When set to Auto, the computer automatically determines the display device. If an external display device (e.g., monitor) is connected, it becomes the boot display; otherwise, the computer LCD is the boot display. When set to Both, the computer outputs to both the computer LCD and an external display device if one is connected. Options: Auto or Both
Memory Test
Enables or disabled memory test on boot-up. Options: Disabled or Enabled
Silent Boot
When enabled, hides the computer startup messages on boot-up (the Extensa logo displays)
System Boot Drive
Specifies the boot sequence (the order of drives that the computer will attempt to boot from). For example, when set to Drive A Then C, the computer attempts to boot from the floppy drive. If no bootable floppy disk is in drive A, the computer boots from the hard disk.
Options: Enabled or Disabled
Options: Drive A Then C, Drive A, Drive C, Drive C Then A
Chapter 2
35
