Operation – Starting the engine 3.
Turn the ignition key to position “I”. ð The warning buzzer sounds.
B-ELE-0070
Fig. 30 4. The starter switch is designed with a re-start lock. The ignition key must first be turned back to position “0” before a new starting attempt can be made.
B-ELE-0072
Fig. 31
NOTICE! Components may get damaged! – Starting attempts should not exceed 30 seconds uninterrupted or max. 3 times for 10 seconds. Then allow the starter to cool down to ambient temperature. – If the engine has not started after these attempts, determine the cause. Turn the ignition key through position “II” to position “III”. ð The starter cranks the engine. The warning buzzer stops. NOTICE! Danger of engine damage! – Warm up engine for a short while before starting work. Do not operate the engine immediately under full load.
52
DRP45DX
