Operation – Starting the engine 4.
Pull the rope by the starter handle, until resistance can be felt.
5.
Guide the starter handle back to initial position.
B-GEN-0083
Fig. 34 6. CAUTION! Danger of injury caused by uncontrolled machine movement! – Always hold on to a running machine. – Always keep an eye on a running machine.
NOTICE! The starter rope may tear off! – Do not pull the starter rope all the way against the end stop.
B-GEN-0084
Fig. 35
Pull the starter handle quickly and with power. 7.
Manually guide the starter handle back to initial position.
8.
If the engine does not start during the first attempt, repeat the starting process. NOTICE! Danger of engine damage! – Warm up engine for a short while before starting work. Do not operate the engine immediately under full load.
9.
Run the engine warm for approx. 1 to 2 minutes in idle speed. ð At idle speed vibration is switched off.
10.
If white smoke comes out of the exhaust after a few unsuccessful starting attempts: n Set the throttle lever to position “MIN”. n Pull the starter handle 5-times completely out. n Repeat the starting procedure.
DFP10D
53
