
1 minute read
combinations
CHAPTER 3 Use
2 – The PROG. button allows the programming of both powershift ranges and can be found on the covered switch panel of the multifunctional armrest (yellow zone). The two powershift ranges selected apply to both directions of travel (FORWARDS/REVERSE).
NOTE: Programming requires the engine to be switched on: - the tractor to be stationary. - the powershuttle lever under the steering wheel to be in NEUTRAL.
Programming can also be undertaken when the engine is off and the ignition is on.
PROG
2
APS
SENS
7205-25
Sezione 3.pmd 45 21/12/2004, 10.47 45