Fuel

CHAPTER 3 Use

Attaching front-mounted implements - Totally lower the front powerlift. - Move tractor with lowered lower links close to the implement until the catching hook is underneath the coupling points of the implement. - Slightly lift front powerlift until the implement is seized by the catching hooks. The locking nose 1 of the catching hook is pressed back. - Suspend upper link into the upper coupling point of the implement.

The locking nose 1 of the catching hook is pressed back.

2

1

7181-192

Removing front-mounted implements - Lower front-mounted implements until safely secured with no residual load on the upper control arm. - Remove upper control arm by pulling interlock flap 2 up and off implement. - Pull up interlock flap of towbar / arrester hook on lower control arms, fold back and attach –towbar / arrester hook unlocked (Pos. 3). - Further lower font powerlift and slowly move tractor back. - Move interlock flap back into pos. 2.

3

7181-192a

Coupling triangle mounting and removing To mount and remove the coupling triangle, follow the same procedure as for the front mounted implements. Due to their lower weight, the interlock flaps should be moved into pos. 3. Once the interlock flaps have been fitted, return to pos. 2.

Mounting and removing front-mounted implements with coupling triangle When mounting and removing front-mounted implements with coupling triangle, observe the instructions of the manufacturer of the coupling triangle. Absolutely observe the pertaining safety instructions and other directions of the respective manufacturer – operating instructions.

140

Sezione 3.pmd 140 21/12/2004, 10.55