1.8
CONTROLS
CAB LAYOUT AND CONTROLS (continued) Interior light The interior light is fitted with an ON/OFF switch (A). To replace the bulb (B) remove lens (C), by easing the lens lugs (D) from the holder (E). Replace the bulb then refit the lens.
Windscreen Heater vents The air flow is fed through vents at the base of the front and rear glass screens. Position vents as required.
Coat Hook Ensure that any item suspended from this hook, does not obscure the operators vision or impede operation of the machine.
Tool Location Suitable tools for wheel nut maintenance are located to the left of the operators seat. Tools consist of a:Tommy Bar Extension Socket
