2. SAFETY INSTRUCTIONS — Prior to use, the operator must make sure that no-one is in the area in which the feeding bucket will be operating. — Pay extreme care to persons passing near protruding instruments. — All operations on the silage bucket must be performed by the driver who, when leaving his seat, must strictly forbid manoeuvres during this time. 1. A single operator. 2. The tractor engine must be switched off prior to all operations on the bucket. All loader and bucket controlsmust be in neutral. — It is prohibited to use the silage bucket for transporting or lifting people or animals. — The silage bucket is designed to work at a maximum pressure of 200 bar. — The hydraulic power source must be able to supply a pressure of 180 bar. — If the seals are damaged, manufacturer’s liability with regard to its supply (in its entirety) will no longer be applicable. — Never modify the hose connections.
Use of the silage unloading rotor: — Prior to use, remove the protective casing. — Caution: for safety reasons, it must only be possible for the rotor to start up if 2 distinct units operated by maintained action are activated (e.g.: solenoid valve control button + action on the control valve lever).
HITCHING — If the silage bucket is to be mounted on the loader or on a self-propelled handling machine, at least one double acting hydraulic line is required. — Balance the mobile assembly using a front or rear counter-weight, depending on the weight and position of the silage bucket.
6
UK-364727 AA - 1209
