SECTION 7 – SERVICE 7.10
CROWN AND/OR PINION GEAR REMOVAL/INSTALLATION
DANGER: Lower header to the ground or engage feeder house locks, shut-off combine, remove ignition key, and wait for parts to stop moving before performing this procedure
Silicone Around Lid
Place Silicone Around Holes
D00043
1. Drilled Bolt, 1/2"x1-1/2" 2. Lock Washer, 1/2" 3. Washer, 2"x17/32"x3/16" 4. Drive End Rotor 5. Finger Bar Drive Arm 6. Finger Bar 7. Bolt, 5/16"x1" 8. Lock Washer, 5/16" 9. Fender Washer, 3/8" 10. Finger Bar Belt 11. Bolt, 1/4"x1/2"
12. Lock Washer, 1/4" 13. Flat Washer, 1/4" 14. Scroll Plate Guard 15. Internal Snap Ring 16. Bearing, 6007 17. Output Spacer 18. Bushing, #16 19. Main Gearbox Housing 20. Pinion Gear 21. Key, 1/4"x1/4"x1-1/4" 22. Bearing, 6206
23. Long Input Spacer 24. External Snap Ring 25. Set Screw 26. Drive Pulley 27. Drive Belt 28. Key, 3/8"x3/8"x1-1/2" 29. Crown Gear 30. Main Gearbox Cover 31. Grease Plug 32. Flat Washer, 3/8" 33. Lock Washer, 3/8"
Tools/Materials Required: • Snap Ring Pliers • Silicone • Mobilux EP 023 Grease (14.4 Fluid Oz.) 51
34. Bolt, 3/8"x4-1/2" 35. Lock Washer, 3/8" 36. Bolt, 3/8"x1-1/4" 37. Nut, 5/16" 38. Lock Washer, 5/16" 39. Belt Guard Bracket 40. Belt Guard 41. Truss Bolt, 5/16"x3/4" 42. Scroll Plate 43. Spacers
