SECTION 7 – SERVICE
7.9 SMALL GEAR BOX REPLACEMENT
DANGER: Lower header to the ground or engage feeder house locks, shut-off combine, remove ignition key, and wait for parts to stop moving before performing this procedure. NOTE: Replacing the small gearbox requires a Special Gearbox Puller. (Part # 0561 225.0). Failure to use this specific tool during installation could damage the gearbox. The Special Gearbox Puller tool is available from your dealer.
D00044
1. 2. 3. 4. 5. 6.
Drive End Rotor Bushing Small Gearbox ¼ x ¼ x 13/16 Inch Key ¼ x ¼ x 1¼ Inch Key 3/8 x 1 ½ Inch Bolt
8. 3/8 Inch Lock Nut 9. 7/8 Jam Nut 10. Bearing 11. Follower Arm 12. Shoulder Bolt Assembly
48
