SECTION 6 – MAINTENANCE/LUBRICATION
6.6 LUBRICATION/MAINTENANCE CHART Read Maintenance/Lubrication Section for proper procedures. Use this chart as a quick reference only.
9 10 11 12 13 14 15 16 17 18 19 20 21 22
Tire Pressure ** Loose Fasteners Hose Leaks Wheel Bolts Drive Chain Tension ** Draper Belt Tension ** Idler Rotor Bolt Drive Rotor Bolt Bearing Damage Teeth Wear Gear Box Wear Worn Paint Spots Cleaning of Units Wear Inspection
23 24 25
Drive Shaft (Points A2, A4) Oil filter element (Mega) Hydraulic power pack oil (Mega)
10
26
Hold Down Arms - Front ***
50
27
Hold Down Arms - Rear ***
50
100 50 50
Change
Service to Perform Drive Shaft Splines Drive Shaft (Points A1, A3, A5) Drive Shaft Clutch Drive Chain & Sprocket ** Rear Carrier Bracket Six Small Gear Boxes Main Gear Box Belt Tension Idler Arm
Clean
1 2 3 4 5 6 7 8
Check
Grease
Lubricate
Frequency In Hours
100
50
50
10 100 100 50 100 10 10 100 50 50 50 50 100 100 100 100 100 100 100 10
** Check first 10 hours of operation, and then at regular chart intervals. *** Up to Machine No. 432 40000 only GREASE SPEC: Use SAE Multi-Purpose Grease per the following: All locations except Driveline slip joints – High Temp. Extreme Pressure (EP2) Performance With 1% Max Molybdenum Disulphide (NLGI Grade 2). Lithium Base Driveline slip joints – High Temp. Extreme Pressure (EP) Performance With 10% Max Molybdenum Disulphide (NLGI Grade 2). Lithium Base GEAR LUBE: Mobilux EP 023 HYDRAULIC POWER PACK OIL: Claas Select Agrihyd HVLP-D (ISO VG 46)
35
