1 minute read
Fitting the blades..............................................................6
from Claas DISCO 8550 C PLUS / 8550 C 8550 PLUS / 8550 8550 C-T 8500 C Assembly and operator's manual -
11
12
13
14 11
13
Fit the bracket(12) within reach of the driver. Screw the control terminal bracket(13) to the bracket(12) with the set screws (M5x16) and self-locking nuts(VM5). Push the control terminal(11) into the control terminal bracket(13). (Fig.11)
Push the plug(13) into the socket(14). (Fig.12)
Push the electrical connection cable into the socket on the tractor.
Connect the hydraulic hose to the connection of a single-acting control valve on the tractor.
Push this button on the control terminal for 1.5 seconds.
(Fig.13) Push this button. The lamp lights up green. Set the tractor hydraulics control lever to the floating position.
When fitting for the first time, the weight of the side mower unit is not available to swing the arm downwards. For this reason, the arms must be pulled downwards.
CONTROL TERMINAL 13
8 7
Push both buttons(7) on the operating box at the same time - the red LEDs(8) light up. Lower the arms on the left and right hand sides with the single-acting control valve. When fitting for the first time, the weight of the side mower unit is not available to swing the arm downwards. For this reason, the arms must be pulled downwards. (Fig.14)
