Introduction
Introduction
1 Introduction INTRODUCTION This operator's manual is the original operator's manual. In the following texts, it will be referred to simply as the operator's manual. This operator's manual is the original operator's manual. In the following texts, it will be referred to simply as the operator's manual. This operator's manual provides information on the use, adjustment and operation of the CLAAS “DIRECT DISC” cutter unit. Note that in the following chapters the CLAAS “DIRECT DISC” cutter unit is also referred to as the front attachment. Follow the advice on correct maintenance and servicing in order to ensure maximum performance and a long service life of your front attachment. Also, have assembly of your front attachment and regular inspections carried out by your specialist workshop. Failure to carry out maintenance work, or incorrect operation will result in poor machine efficiency and loss of valuable time. By ensuring correct operation, and carrying out maintenance and service work with care, you will be able to make full use of state-of-the-art technology and of the experience with which your front attachment has been designed. Your CLAAS Service Department
Validity This operator's manual applies to all cutter units: DIRECT DISC 520 Contour / 520 Type 426 From serial No. 42601001.
1.1
BA DIRECT DISC 520 Contour / 520 - 00 0299 924 4
