FRONT AXLE: DISASSEMBLY Suggestions Removing the Lock Nut
Removing Bearings
Use a lock nut wrench (Special Tool).
The inner race of the tapered roller bearing remains in the axle housing when the hub is drawn out. Remove this race together with the seal retainer with a bearing puller.
Tool Lock Nut Wrench
EC15K - 18KL 91268-00800
EC20K - 30KL 03703-59001
Special Tool
203651
200232
Removing Front Wheel Hub Use a wheel hub puller (Special Tool). Tool
EC15K - 18KL
Wheel Hub Puller 64309-40100 (Puller seat) (64309-10601)
EC20K - 30KL MH061017
NOTE It is not necessary to remove the oil seal from the hub or to disassemble the oil deflector unless the seal is defective.
Special Tool
200233
2.6
